View previous topic :: View next topic |
Author |
Message |
Mike Jennings
Joined: 22 Mar 2008 Posts: 286 Location: England
|
Posted: Sat Feb 27, 2016 5:05 pm Post subject: Front wheel for SB3 |
|
|
Hello,
I'm looking for a front Campagnolo wheel for a Bimota SB3.
Cheers, MikeJ |
|
Back to top |
|
|
waggy
Joined: 26 Sep 2011 Posts: 277 Location: Northern Ireland
|
|
Back to top |
|
|
bimotanige
Joined: 12 Jul 2010 Posts: 582 Location: yorkshire
|
Posted: Sun Feb 28, 2016 5:56 pm Post subject: |
|
|
Hi Mike, what's up with the one you have? The campag above, if it's like mine that can fit a Yam is wider across the hub and the standard brembos and carriers won't fit - the discs are too wide apart. Also you can't fit a speedo drive as you only have 10mm I think at either side. I had some carriers and discs made at a good price. Mailme and I can send you a couple of pics
Nige _________________ KB1x2, SB3 SB4 BB1 DB2 Vdue Evo YB11 RB1 Ducati MHR Suzi GS650 |
|
Back to top |
|
|
Mike Jennings
Joined: 22 Mar 2008 Posts: 286 Location: England
|
Posted: Mon Feb 29, 2016 10:15 am Post subject: SB3 wheel |
|
|
Hello Waggy and Nige,
thanks for the replies. The original Campag. was dented and Hagon's couldn't straighten it so it's out of action, unfortunately. I've fitted a replacement wheel which also needed special carriers made but it's a small flanged Speedline or something similar which doesn't match the rear Campag. so I thought I'd see if anyone had the correct wheel. There's no rush on the bike as I've been fiddling with it for about twelve years now- it'll probably end up being left to a museum in my will!
Cheers, Mike |
|
Back to top |
|
|
|