Bimota Forum

[sb8rs]

I am having a clear out and have found these parts.

If you are interested in any please pm me with your email address and I will send pictures.

Prices are negotiable.

YB4/6 spare Parts

YB front indicators x 3 New (including wiring)

YB front indicators x 3 Used (lens only) - sold

YB aluminium Sub frame x 1 – Used, needs realignment.

YB4/6 rear huggers x 3 – All used. 2 very good, 1 (lug needs repairing)

YB axle adjusters x 2 – Used (arm type) - sold

YB silencer mounting bracket (aluminium) x 3 – New.

YB Right hand handle bar (black) x 1 – New

YB headlight screen x 1 – New

YB4 / Furano / DB2sr Potentiometer x 3 – New - sold

YB Mudguard support x 2 – New -500761090

YB rear seat pad x 1 – Used

YB4/6 Ignition switch x 1 – New - sold

YB K&N air filter x 2 – New

YB4/6 Headlight x 1 – Used

YB4/6 Headlight adaptors x 2 – New (so you can fit H4 bulbs).

YB seat bolts x 4 – 2 x New, 2 x Used - sold

YB cotton reels x 2 pairs – New (so you can put on a paddock stand).

YB4/6 foot peg x 1 – New - sold

YB4/6 foot peg support x 5 – 4 x New, 1 x Used 500782050

YB4 fuel relay (Maserati) x 1 – New - sold

 

Marzocchi M1R front fork kit (all seals and bushes etc) x 1 – New

Marzocchi M1R caliper mounting brackets (40mm to 65mm calipers) – Used - SOLD

 

Yamaha starter clutch kit – New – 3gm-15580-00 - SOLD

 

 

Bimota Tesi 1D spares

 

8 x 501781310 – New (tav 22 #20) - sold

1 x 501781280 – New (tav 22 #26 - sold

2 x 501781210 – Used (tav 22 #25) - sold

2 x foot support – New – 501782160 (tav 30 #14) - sold

 

HB2/3, KB3 & SB4 Spares

 

1 x eccentric – new t00-0050202

4 x rear axle adjusters – used (arm type).


YB11 spares

Front mudguard carbon x 2 - Both used one needing repair.
Carbon dash with seals.

 

I also have another two new foot peg supports that I am unsure of which model bimota they fit some axle covers and another seat pad?

I am more than willing to send pictures if anyone can tell me what they are from?

 

 

[2bims]

email the "unsures" to me if you like SB8RS....and I'll have a look see

[2bims]

Some parts of the "unsures" that I cant identify either.......

First 3 piccies are same part:-

[Mike Jennings]

Hello,

could the first part be something to do with the front sprocket on a DB1? Also, the plastic discs could be for early fork tops. I might be wrong on both of these as it's a while ago since I've seen them,

Cheers, MikeJ

[sb8rs]

Thanks Mike

[PaulDB2]

Hi, PM sent. Cheers, Paul
_________________
Bimota DB1, Bimota YB5, Bimota YB6 Exup, Bimota YB9 SR, Ducati NCR Replica, Moto Guzzi 750 S3, Honda CR750 race replica, Seeley-Suzuki TR500

[Admin]

Hiya

YB front indicators x 3 New (including wiring)

YB front indicators x 3 Used (lens only)

YB4/6 rear huggers x 3 – All used. 2 very good, 1 (lug needs repairing)

YB axle adjusters x 2 – Used (arm type).

I could be interested in a few of these bits. Not sure which indicators they are, but if they happen to be the ones used on the Dieci then a spare set would be great (YB4, etc, had different indicators). A rear hugger I really need (would need painting silver, so paint finish isn't relevant but being solid is!). Chain adjuster eccentrics I could do with but not sure which ones you mean by 'arm type'

All the best

Katy[/b]

[sb8rs]

Hi
Ok, sorry to clear things up a bit.
These indicators are yb4/6/8 fitment.
Huggers are yb4/6 I am not sure if they will fit a deici?
The axle adjusters are "pinned bars" which fit into the eccentric so you can rotate it for adjustment. They are made out of aluminium so are light and can be carried on the bike.
I have both types early and late as there are two different sizes of lugs.
Lastly I am in negotiation to sell all the parts to one person. So once this is completed I will know what is left.

[sb8rs]

Ok,

a lot of items have now gone.

Below is all I have left.


YB4/6 spare Parts


YB front indicators x 3 New (including wiring)

YB aluminium Sub frame x 1 – Used, needs realignment.

YB4/6 rear mudguard x 3 – All used. 2 very good, 1 (lug needs repairing)

YB silencer mounting bracket (aluminium) x 3 – New.

YB Right hand handle bar (black) x 1 – New

YB headlight screen x 1 – New

YB Mudguard support x 2 – New -500761090

YB rear seat pad x 1 – Used

YB K&N air filter x 2 – New

YB4/6 Headlight x 1 – Used

YB4/6 Headlight adapters x 2 – New (so you can fit H4 bulbs).

YB cotton reels x 2 pairs – New (so you can put on a paddock stand).

YB4/6 foot peg support x 5 – 4 x New, 1 x Used 500782050

Marzocchi M1R front fork kit (all seals and bushes etc) x 1 – New


HB2/3, KB3 & SB4 Spares
 

1 x eccentric – new t00-0050202

4 x rear axle adjusters – used (arm type).


YB11 spares

Front mudguard carbon x 2 - Both used one needing repair.
Carbon dash with seals.

YB7 spares

1 x foot peg support 

Unknown model

1 x seat pad (same as YB4/6/ - brand new but connects with lugs not screws

If unsold these items will go onto eBay.

[Admin]

Hiya

Definitely interested in a rear hugger. I expect they are the same on the Dieci

Could you email me some pics please?

All the best

Katy

[sb8rs]

Katy
Please pm your email address.

[Admin]

Hiya

The 2nd picture looks like a top engine mount from a YB bike

All the best

Katy

[sb8rs]

No more interest, so onto ebay.

[MWR]

CVAN I SE PICS OFF L/H FOOT PEG ASSY'S?
LOOKING FOR YB8E PARTS
Thanks
murraywestracing@gmail.com
_________________
YB8E
HARRIS F1
ZXR750
RZ390
RS250 GP HONDA
DUCATI749R
APRILLIA SL ALUMININO

[2bims]

I think all of his YB footpeg brackets have gone...but they were YB4/6 and not YB8....he advertises on ebay uk what he has left