Bimota Forum Forum Index Bimota Forum
Forum for Bimota Owners and Riders
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in  

Furano brakes

 
Post new topic   Reply to topic    Bimota Forum Forum Index -> YB Series
View previous topic :: View next topic  
Author Message
nick3584



Joined: 19 May 2022
Posts: 1
Location: Hereford, Herefordshire

PostPosted: Thu May 19, 2022 12:47 pm    Post subject: Furano brakes Reply with quote

Does anyone know where I can get rear caliper seals for a Furano???
_________________
Nick Barrow
Back to top
View user's profile Send private message
Andrew034



Joined: 02 Apr 2017
Posts: 52
Location: Sydney

PostPosted: Sat Jun 04, 2022 12:04 am    Post subject: Reply with quote

I don't know what the brand rear calliper is however:

The Furano uses Brembo front brakes (that are the same as Ducati 888SP models of the era) and therefore the rear is likely a Brembo too.

Since the bike mechanicals are based on a Yamaha FZR1000 it is also possible the rear is.a Yamaha unit. And it might be something else all together.

Notwithstanding, brake seals and pistons are relatively interchangeable and come in standard sizes. So a rebuild kit for the correct size pistons will probably work just make sure the cross section of the replacement seals match the section of the original and if your replacing pistons they are the same length to.

I'll look at my Furano if you need some more advice.

Andrew...
Back to top
View user's profile Send private message
Anders



Joined: 05 May 2009
Posts: 121
Location: Norway

PostPosted: Tue Jun 07, 2022 7:13 am    Post subject: Reply with quote

This seems to fit:
https://www.sd-tec.de/en/brake-caliper-repair-kit-05/item-1-20279910.html
_________________
Anders
bb1, Mille S2, Guzzi / Watsonian, Morini Corsaro 125, EC200, RD350YPVS etc
Back to top
View user's profile Send private message Send e-mail Visit poster's website
Jonny B Bad



Joined: 05 Dec 2009
Posts: 555
Location: NE London

PostPosted: Tue Jun 07, 2022 8:56 am    Post subject: Furano rear calliper Reply with quote

Two different rear callipers in use at that time. Look the same from the outside, but one has a dust seal that sits over the piston (as in the previous post) and one has a dust seal that sits in the cylinder. You need to take the calliper off and remove the pads to identify which one you’ve got.
_________________
What, Jonny's gone!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Bimota Forum Forum Index -> YB Series All times are GMT + 1 Hour
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group

The Bimota Forum has no official connection to Bimota S.p.A.. We just ride or are interested in their motorcycles and support the brand. All trademarks are acknowledged