![Bimota Forum Forum Index](templates/BimotaForum/images/logo_phpBB.gif) |
Bimota Forum Forum for Bimota Owners and Riders
|
View previous topic :: View next topic |
Author |
Message |
Doctor_jim
Joined: 08 Nov 2021 Posts: 12
|
Posted: Mon Nov 08, 2021 11:04 am Post subject: Paioli RSU 43mm cartridge removal tool - or complete tools |
|
|
Hey guys!
I am new to the forum! Just got a YB9 SR and got around to overhauling most of the parts.. I am trying to source a tool in order to remove the fork cartridges, but these are pretty rare to come by!
I’ve seen the other post with the manual etc, but can’t find any information on the tool, and would either buy one off Someone willing to sell it or manufacture one if someone is so kind to share the measurements here
Best regards,
D. Arsenakis _________________ Greek- Australian guy, located in Germany
I love classic bikes
Well just one Bimota so far, it's an YB9 SR
Ducati 450 Desmo, 900SS, ST2, DS1100
Moto Guzzi V7 Sport, V7 Spezial, v65
Lots of Hondas, BMW's, Triumph etc. ![Smile](images/smiles/icon_smile.gif) |
|
Back to top |
|
![](templates/BimotaForum/images/spacer.gif) |
Anders
![](images/avatars/20049603874a00931fdec4d.jpg)
Joined: 05 May 2009 Posts: 121 Location: Norway
|
Posted: Mon Nov 08, 2021 2:45 pm Post subject: Re: Paioli RSU 43mm cartridge removal tool - or complete too |
|
|
Doctor_jim wrote: |
Hey guys!
I am trying to source a tool in order to remove the fork cartridges, but these are pretty rare to come by!
I’ve seen the other post with the manual etc, but can’t find any information on the tool, and would either buy one off Someone willing to sell it or manufacture one if someone is so kind to share the measurements here
|
Hello,
didn't you see my answer on my blog?
In any case, I can repeat it here:
Outside diameter is 37.8mm. Inside diameter is 25. The Long pipe is 26mm outside and 15mm inside. The overall lengt is approx 450mm.
The distance between the flats is 32mm
Hope this helps.
The docs are available at my home page:
http://www.kvenna.net/Doc/PaioliRSU.html _________________ Anders
bb1, Mille S2, Guzzi / Watsonian, Morini Corsaro 125, EC200, RD350YPVS etc
Last edited by Anders on Wed Nov 10, 2021 9:08 am; edited 1 time in total |
|
Back to top |
|
![](templates/BimotaForum/images/spacer.gif) |
Doctor_jim
Joined: 08 Nov 2021 Posts: 12
|
Posted: Mon Nov 08, 2021 9:15 pm Post subject: |
|
|
Thanks! I've just checked the answer also on your Blog!
I'll crack on making the tool- maybe a friend can help me with the lathe.
That's very nice of you giving me the measurements, there isn't much information on these forks.
I'll try to document the rebuild process meticulously and take enough pictures while on it. I'll also try to find the right sizes for the o-rings since I haven't found them anywhere to buy.
The seals on mine where 43x55,1x9,5/10,5- I shall see how the fit when installed and report back.
I'll try to make a post on the chat section with the whole thing!
If you have any more information regarding the o-rings and the other consumables needed you can let me know.
Best regards,
D. Arsenakis _________________ Greek- Australian guy, located in Germany
I love classic bikes
Well just one Bimota so far, it's an YB9 SR
Ducati 450 Desmo, 900SS, ST2, DS1100
Moto Guzzi V7 Sport, V7 Spezial, v65
Lots of Hondas, BMW's, Triumph etc. ![Smile](images/smiles/icon_smile.gif) |
|
Back to top |
|
![](templates/BimotaForum/images/spacer.gif) |
Anders
![](images/avatars/20049603874a00931fdec4d.jpg)
Joined: 05 May 2009 Posts: 121 Location: Norway
|
Posted: Wed Nov 10, 2021 9:11 am Post subject: |
|
|
That's great. I am looking forward to that. I haven't done my forks yet, only replaced the oil from time to time. I have bought a 43mm low friction SKF seal kit (for a Kyb) and hope it is suitable. For bushings and o-rings, I haven't bought anything yet.
I hope to service the forks this winter if everything goes according to plan (which it seldom does). _________________ Anders
bb1, Mille S2, Guzzi / Watsonian, Morini Corsaro 125, EC200, RD350YPVS etc |
|
Back to top |
|
![](templates/BimotaForum/images/spacer.gif) |
2bims
![](images/avatars/14911970185cb2cf9ef188a.jpg)
Joined: 03 Apr 2010 Posts: 7292
|
|
Back to top |
|
![](templates/BimotaForum/images/spacer.gif) |
Doctor_jim
Joined: 08 Nov 2021 Posts: 12
|
Posted: Sun Nov 14, 2021 11:55 am Post subject: |
|
|
Thanks for the reply. I’ve already contacted the seller- he Dienst have any 43mm parts or tools.
Good news is I’ve finished making the tool myself, after using the information on the forum!
I plan on removing the forks and doing a rebuild next week.. I’ll take plenty of pictures and start a post when I am done
Best regards,
D. Arsenakis _________________ Greek- Australian guy, located in Germany
I love classic bikes
Well just one Bimota so far, it's an YB9 SR
Ducati 450 Desmo, 900SS, ST2, DS1100
Moto Guzzi V7 Sport, V7 Spezial, v65
Lots of Hondas, BMW's, Triumph etc. ![Smile](images/smiles/icon_smile.gif) |
|
Back to top |
|
![](templates/BimotaForum/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
The Bimota Forum has no official connection to Bimota S.p.A.. We just ride or are interested in their motorcycles and support the brand. All trademarks are acknowledged
|