Bimota Forum

luciousesox · Joined: 31 Jan 2018 Posts: 42 Location: WORCESTER, ENGLAND

Hi Brian
Be brilliant if you have one.
The ID bore looks to be 25mm fine thread but I think the threads are standard.
The OD is 73mm, this will then fit over the frame acting as a dust cap and of course clamp the bearing down.
_________________
Bimota YB9, RD500,Z1 1974,Z1 1975, Benelli 750sei, 900sei, GPZ 750 turbo, Rudge super sport, S.O.S, BSA Rkt 3 1969, 1966 Bonnie, Egli Vincent 1954,Guzzi 850T, Commando fastback, Commando Interstate, Enfield Interceptor 69, 72 H2, 69 H1, Suzy Gt750 J

brian · Joined: 22 Aug 2011 Posts: 3769 Location: Australia

luciousesox · Joined: 31 Jan 2018 Posts: 42 Location: WORCESTER, ENGLAND

Hi Brian
That looks very similar, are you will I get to sell it to me.
How much do you want for the cap,
Thank you
_________________
Bimota YB9, RD500,Z1 1974,Z1 1975, Benelli 750sei, 900sei, GPZ 750 turbo, Rudge super sport, S.O.S, BSA Rkt 3 1969, 1966 Bonnie, Egli Vincent 1954,Guzzi 850T, Commando fastback, Commando Interstate, Enfield Interceptor 69, 72 H2, 69 H1, Suzy Gt750 J

brian · Joined: 22 Aug 2011 Posts: 3769 Location: Australia

welshlamb · Posted: Sun Feb 07, 2021 2:23 pm Post subject:

Hi , Brian, Let me check the DB2 part in my garage first. If my part is suitable it would save the hassle of postage for you. Also at the moment international deliveries can be a bit erratic and of course there is the dreaded duty VAT gamble. Will check this afternoon and post up.
_________________
Not as many bikes as I would like and already too many to keep up with!

welshlamb · Posted: Sun Feb 07, 2021 3:04 pm Post subject:

Unfortunately I can’t help. Worth a try Sad

The steering stem thread is the same (M25 X 1mm) but the Inner OD of the DB2 dust cap/ bearing has an inner OD of 63 mm.
Is that the same as the part you got from Germany?
_________________
Not as many bikes as I would like and already too many to keep up with!