Bimota Forum

I had serious bucking and hesitation issues with my bike several years ago. After some research I decided to clean the TPS with electronic parts cleaner. Made a huge difference and returned to the usu ...

Thanks! With the cylinders off the only issue I found so far is the pipe at the top of the pump. It is not closed but if left unattended I could imagine that it would which is why I posted for the for ...

Has anyone sourced the 10 X 1.5 thread bolts that secure the CF side panels at the rear and exhaust hanger to the tail?
https://ibb.co/87rBT78

[/img]

In the process of a big bore upgrade (more to follow when I have all the parts) I found corrosion on and in the coolant pipe at the top of the pump. Might be worth a look if you have time on your hand ...

For Part No. 214000055 - passacavo (seatunit rubber), TAV Number - 12
I used NAPA Part Number NOE 7701306
Rubber Grommet Dorman Products Inc 7/8 I.D. in.
https://www.napaonline.com/en/p/NDP7701306 ...

I see waggy posted the parts diagram in another thread showing the TB's and TPS. Were you able to fix the hesitation?
Best - Whit

Hi Neil - Look at this thread. Follow the link inside it for TPS cleaning instructions.
http://www.bimotaforum.co.uk/viewtopic.php?t=4472

biturbo - could be your TPS. see:

http://www.bimotaforum.co.uk/viewtopic.php?t=3911&start=0&postdays=0&postorder=asc&highlight=

Agree w/ SB8R Tuner. Had similar issues w/ both of mine. Mark position of TPS (Sharpie silhouette on TB will get you close). Remove and clean with Electronic cleaner aerosol solvent by spraying into s ...

Finally got around to installing the light. It only comes with one positive wire (red) for the brake/tail light. Made a "Y" adapter to connect both brake and tail light positive leads to the ...

Somewhat dependent on ambient temperature and the bike. I have a stock one that runs cool as yours does and another with moto corse twin Ti exhaust that runs much hotter. Not certain if there is any c ...

Did you fit one of these or is yours stock?

Thanks much - Found a US based vendor. Trying to decide between clear and smoked.
http://www.racingplanetusa.com/tail-light-assy-smoked-integrated-indic ...

Has anyone adapted a low profile license plate holder and tail light assembly from another bike (Ducati, Yamaha, Suzuki, etc) to the SB8R? Looking for a LED flashing brake light & turn signals as ...

Hello all - Looking for a guide on changing the fork oil on my bikes. Have the manual for two different versions of the Paioli 46mm fork (MCX & RSU) but neither matches the USD on the SB8R. In add ...