Bimota Forum

So, ive had it on the Dyno (one of the best dyno tuners in the country)
I took it in completely standard including the TPS set at factory .65V
The fueling is OK. Not great, not bad, but acceptable. ...

Not sure about your model. But I had same trouble with my Furano.
You can start again and go down the thermistor route but it’s not that simple.
I think I’ve got mine sorted. If you want details, le ...

Thanks for the reply. Yes i didnt think about the slight difference FZR/Bimota induction. I have read much over the years about exup removal on FZR and consensus is very anti exup removal. The diaphra ...

You can, but you must leave the exup servo on and running.
Ive done it on my race bike and you actually loose quite a lot of power below 5K
It cannot be tuned back. I would highly recommend leaving ...

Thanks for the info Andrew. Much appreciated
I will get back here in a month or two with my findings.
Cheers Steve

Interesting.
I also own a 89 fzr1000 and had it dyno tuned after doing some minor changes and the fueling was pretty good. Had to drop mains one size.
( I live at sea level)
It’s fairly normal for ...

Hi. New Furano owner. I haven’t ridden the bike yet but I believe it was running OK and sounds good. I am sorting the bike for first registration in my country. But I do know that it’s been running ri ...

Hi, looking for the black plastic cover that covers the rear of the ECU and possibly the rubber bunjys that hold it on there? Mine must have fallen off at some stage.
New Zealand.
Thanks Steve.

Yes i have read the ferrodo platinum are Good for cast iron. The OEM pads in there are virtually new so ill just bang them back in there. They will probably out last me.

I run a file on them. Seems they are cast iron. Excellent.
Suppose any organic pad should be fine.

Are they cast iron though? Somehow i doubt that. Too thin and with holes they would be quite fragile. Arent they just some type of steel?
The pads that came out i recon are original. Frendo 222 but i ...

Hi all, first post here. My furano is on its way too me, cant wait to see it!
Just wondering on best pads for the high carbon? discs. Well they are rusty.
This bike is not going to be ridden hard so ...