Bimota Forum

Sorry for the multiple posts. Each time I hit General Error
Failed sending email :: PHP ::
DEBUG MODE
Line : 234
File : emailer.php

If there is an edit or delete function in this forum, I canno ...

Sorry for the multiple posts. Each time I hit [SUBMIT] I got an ERROR message, so I kept trying. Finally, in a last-ditch effort, I emailed Jun Takei. Today, everything showed up on the forum.

If ...

I'm Jun. I live in Japan.
First of all, this sentence is translated into English by google translation, so it may be a little strange.

Well, I got a tesi-3d LE last July.
The question is how to r ...

Unplug the turn signals and remove them.
Remove the turn signal mounting brackets.
Remove both side-covers below the tank.
Remove the two screws circled in your photo.
Spread the fairing/cowl a ...

Unplug the turn signals and remove them.
Remove the turn signal mounting brackets.
Remove both side-covers below the tank.
Remove the two screws circled in your photo.
Spread the fairing/cowl a ...

http://www.deathstar.org/~flash/Tesi_Fireworks.e.1024.jpg

As you have learned, it is a BAD IDEA to "let the battery live on a trickle charger."

Get a timer to turn lamps on and off in your house to make it look like someone is home. Put it in th ...

Three of them are at Iconic Motorbikes.
https://fb.watch/4X-U-tgDEY/

And....the next question should be....Can I change the cam belts with the engine in-situ...Omega plates on ....Apparently...Yes....but the next question is....how the heck do you get the horizontal ca ...

The seat is secured by two 6mm bolts. The one in the rear is easy. The one in the front is a royal pain in the ass because it is at a wonky angle and the shock and exhaust make getting a tool to the b ...

I would like to change the indicator bulbs to some very bright LEDs in my 2008 Tesi 3D. The rear units were fairly simple. The fronts... I have removed the screws (one per indicator). I have gently pu ...

Thanks for your reply.

>which Tesi3D is it?
Concept
America

After removing the gas tank from a Tesi 3D, adjacent to the connector for the fuel pump / fuel-level sender are three unused connectors, a two-pin, four-pin and nine-pin (only 8-pins occupied).

Ca ...

Anyone can do the VT thing themselves and save the $150.
Don't you have to physically be IN Vermont or have a Vermont mailing address to do it yourself? That's a legitimate question to which I do not ...

High bid was US$14,100.
Reserve was not met.

BTW,regarding the title...
"It comes with a Japanese title – the seller has had it in a US-based collection for quite some time but he never reg ...